|
08:00 - 08:45
|
Registration (Hall) |
|
|
08:45 - 09:00
|
Introduction (Amphitheater) |
|
|
09:00 - 10:00
|
Keynote (Amphitheater) |
|
| 09:00 - 10:00 |
› Green sealing: How to combine both low leakage and low friction? - Klaus Lang, EagleBurgmann Germany GmbH & Co. KG. |
|
|
10:00 - 10:30
|
Coffee break (Hall) |
|
|
10:00 - 10:30
|
Posters (Hall) |
|
| 10:00 - 10:30 |
› Control of Seal Leakage and Friction Using Tribotronics |
|
| 10:00 - 10:30 |
› Friction reduction with lasting ePTFE coating for elastomeric dynamic seals - Christian Wimmer, W. L. Gore & Associates GmbH |
|
| 10:00 - 10:30 |
› New approach of inverse lubrication theory IHL: Application for U-cup hydraulic rod seals |
|
| 10:00 - 10:30 |
› Non-contacting gas seals for reduced-scale high-speed turbomachinery application: Selection of seals and prediction of leakage - Suresh Katuwal Chhetri, Laboratory for Applied Mechanical Design, École Polytechnique Fèdèrale de Lausanne |
|
| 10:00 - 10:30 |
› The start-up optimization of a steam turbine with abradable seals, using vibration monitoring - Charles GRISLIN, Machinery Diagnostic Services |
|
|
10:30 - 12:10
|
Low leakage and static seals (Amphitheater) |
|
| 10:30 - 10:55 |
› Recent developments in zero-leakage and low-friction mechanical seals with textured surface - Yuichiro Tokunaga, Eagle Industry co., ltd. |
|
| 10:55 - 11:20 |
› Experimental analysis of mechanical seals operating under accidental conditions - adjemout mohand, Latty International |
|
| 11:20 - 11:45 |
› Zero leakage and low friction with ferrofluid seals - Stefan Lampaert, Delft University of Technology, Faculty 3mE, Department PME |
|
| 11:45 - 12:10 |
› Using an Empirical Method to Estimate Leak Rates in Support of Lowest Emission Gasket Selections - Dale Rice, VSP Technologies |
|
|
12:10 - 14:00
|
Lunch (Hall) |
|
|
14:00 - 15:40
|
Seals in turbomachinery (Amphitheater) |
|
| 14:00 - 14:25 |
› Experimental and numerical investigation of viscoseal - Mohamed Jarray, Institut Pprime |
|
| 14:25 - 14:50 |
› Refurbishment of Axial & Radial Type Turbine Shaft Seals Using Elastomeric Polymers, to Extend Wear Life and Reduce Leakage Rates - Greg Auger, Thordon Bearings Inc. |
|
| 14:50 - 15:15 |
› Numerical analysis of lift generation in a radial segmented gas seal - Samia DAHITE, Institut Pprime |
|
| 15:15 - 15:40 |
› Multi-phase computational fluid dynamics (CFD) analysis of helical groove stator for no leakage non-contacting annular seals - Cori Watson, University of Virginia |
|
|
15:40 - 16:10
|
Refreshment (Hall) |
|
|
16:10 - 17:25
|
Elastomeric seals (Amphitheater) |
|
| 16:10 - 16:35 |
› Sealing contact shaft structure design using EHL simulation - Stefan Thielen, Institute of Machine Elements, Gears & Transmissions |
|
| 16:35 - 17:00 |
› The grooved lip effect on reciprocating hydraulic rod seal performances in transient condition: Elastohydrodynamic lubrication - YOUSSEF BAHI, Ecole nationale supérieure d'arts et métiers |
|
| 17:00 - 17:25 |
› A Radial Lip Seal Tribometer to Show the Influence of Lubricant Modifications on the Friction in the Sealing Zone - Gerrit Weiser, Hamburg University of Technology |
|
|
17:25 - 17:45
|
Closure (Amphitheater) |
|
|
18:00 - 19:00
|
Visit - Visite of experimental facilities (registration necessary) |
|
